31x10.50 R15 vs 33x12.50 R15

What changes when you change tire size?

33x12.50 R15 is outside the configured tolerance for 31x10.50 R15: +6.5% diameter and +6.5% speedometer effect.

Geometric comparison

Geometric comparison
Metric This size: 31x10.50 R15 Alternative: 33x12.50 R15 Difference Verdict
Overall diameter 31.00 in 33.00 in +6.5% Too tall
Section width 10.50 in 12.50 in +2.00 in Computed difference
Sidewall height 8.00 in 9.00 in +1.00 in Computed difference
Circumference 97.39 in 103.67 in +6.5% Too tall
Speedo 0.0% +6.5% +6.5% Outside tolerance

Compare sizes

Looks valid
Looks valid
Units
Editorial preset

These are TireFitLab editorial diameter-screening presets. Regional names choose a preset, not a national legal limit, ETRTO rule or vehicle approval. The AWD preset does not establish an allowable drivetrain mismatch. Use the exact vehicle and tyre manufacturer instructions; nominal geometry alone cannot approve fitment.

Not recommendedOut of tolerance · Diameter +6.5% (+2.00 in) · US preset (±3%)
  • Not recommended · This rating covers tire geometry only, not vehicle compatibility.
  • Diameter +6.5% · Ride-height change +1.00 in.
  • Speedometer reads low · 60 mph → 63.9 mph.
  • Sidewall +1.00 in · Width +2.00 in.
Diameter+6.5%+2.00 in
Speedo @ 60+6.5%60 mph → 63.9 mph
Sidewall+1.00 inWidth +2.00 in
Ride-height change+1.00 inDiameter ÷ 2
How this result is calculated

Computed from nominal tire-size geometry: diameter, circumference and speedometer error. It does not check vehicle placard approval, load/speed rating, rim-width range, wheel-arch, suspension or brake clearance.

Methodology

Before fitting

  • Check the vehicle placard and owner’s manual first.
  • Match or exceed the required load index and speed rating.
  • Confirm rim-width range, bolt pattern, hub bore, offset and fasteners.
  • Inspect wheel-arch, suspension and brake clearance under real vehicle load.
  • Check TPMS, cold pressure and local roadworthiness rules.
Diameter
31.00 in 33.00 in+2.00 in
Sidewall
8.00 in 9.00 in+1.00 in
Width
10.50 in 12.50 in+2.00 in
Circumference
97.39 in 103.67 in+6.5%
Revs / mile
651 611
Speedo @ 60
60 mph 63.9 mph+6.5%
Ride-height change
0.00 in +1.00 in
True distance per 100 indicated
100 mi 106.5 mi+6.5%
Δ⌀ +2.00 inΔ↔ +2.00 in
  • Current — 31x10.50 R15
  • New — 33x12.50 R15
  • Grounded to the road: the axle rises +1.00 in.

Tires and wheels in one comparison

Result report

31x10.50 R15 33x12.50 R15 · Not recommended · Out of tolerance

Copy/print uses this page state only; TireFitLab does not create an account or store a server-side report.

Embed or cite this result
Open embed preview

Geometric estimate. Always verify physical clearance (arches, suspension, brakes) before fitting.

In-tolerance alternative sizes

In-tolerance alternative sizes
SizeDiameterSpeedo @ 100Use this
−1″ 265/80R14-1.0%-1.0%
OE 265/75R15-1.1%-1.1%
+1″ 275/70R16+0.5%+0.5%
+2″ 265/70R17+2.0%+2.0%

31x10.50 R15 · 33x12.50 R15 · Methodology